How to Use a Manual Operation Pool Vacuum

A manual pool cleaner is a simple concept that requires no power or connection to a filter. It is best for a small pollution area and can handle a variety of debris that collects on the bottom (sand, pebbles, etc.). But there are some nuances in using it.

How to vacuum your pool manually

Here are some tips that we recommend you read because they will help you understand the most important things when using vacuum cleaners.

Assembly. This may surprise you, but the total assembly time will not take more than 2 minutes. You can easily adjust the length of the telescopic pole to the depth of the pool so that it reaches the bottom and provides effective cleaning.

Cleaning. Let’s understand how this process takes place: to remove debris from the bottom, first, the vacuum cleaner sucks water with debris into a special container. Next is filtration, when the debris remains in the filter and clean water flows out of the tank. This process would not be possible without a siphon. 

Step-by-step guide on the cleaning process:

1. Close the hole at the end of the pole with your finger or another object that fits the size and will fit snugly, creating a vacuum.
2. Immerse the other end of the pole in the water to the bottom and bring it as close as possible to the dirt.
3. Pull out your finger or another object with which you covered the hole. You can see the process when water is pushed into the tank and the vacuum effectively draws in dirty water.
4. At the last stage, remove the appliance from the water. Dirt will remain in the filter and clean water will leak out.

On average, each “cycle” lasts no more than 3-4 seconds. But if the bottom of the spa has a lot of dirt, it will take a little longer to clean. So if you are looking for a vacuum cleaner for periodic and spot cleaning, then this is a perfect choice.

Filter cleaning. When too much debris enters the filter, its efficiency is significantly reduced, which leads to the fact that the water drains much more slowly. In this case, the filters must be cleaned. This can be done very quickly and effortlessly: unscrew the lid, remove the two filter elements and rinse them with water from a hose or some other strong jet of water.

Storage. It is a simple vacuum cleaner made of plastic and aluminum and does not require special storage. The only thing that is important to follow when storing is to protect it from the sun.

Pros and cons of Manual Pool Cleaners

(+) Ease of use

The vacuum cleaner is lightweight and easy to use. The only requirement for the vacuum cleaner to work properly is a depth of more than one or two pounds of water, at which it can clean the bottom much more efficiently. Also, remember that the filter needs constant cleaning. To do this, follow just a few simple steps: forget about washing or drying the filter, just unscrew it, rinse with water, and twist it back.

The unique and harmonious structure of this vacuum cleaner, which does not contain useless details, allows everyone to use it every day.

(+) The best choice for daily or spot cleaning

This 7 feet aluminum telescopic stand-up, provides the highest efficiency and ability to clean the hardest-to-reach crannies.

Good to have on hand at the first appearance of dirt.

(+) No additional costs

Forget about looking for an outlet, charging the battery, and connecting water hoses or cords. This cleaner works very simply requires no additional accessories and works completely manually. 

(+) Durable

Thanks to its simple design, which does not require special care, you can not only use it for years but also save well. This device does not require batteries and does not consume electricity.

(-) Weak suction at depths below 1 to 2 feet

The principle of operation of this vacuum is very simple: it works due to the difference between atmospheric pressure on the water surface and water pressure at depth. As a result, suction occurs and the deeper the water, the better it works. Also, the smaller the surface, the worse and less efficient the suction will be.

Alternatives of Manual Pool Cleaners

As mentioned above, the greater the depth of the cleaner, the more efficient it is. But if you need to clean the dirt to a depth of more than 1-2 feet, we recommend that you use a battery-powered vacuum cleaner (its efficiency does not depend on depth). 

(-) Not suitable for large areas or large amounts of debris

This vacuum cleaner only provides suction for a short time. Yes, it is very easy to empty and reuse the vacuum, but if you have a lot of debris or want to clean a large area of the bottom, it will take a long time.

Of course, you can effectively use this device for large areas and depths, because that’s when it works most efficiently. It’s easy to adjust to any depth, but remember that if the dirt is too much, it’s not the best purchase. 

Alternatives of Manual Pool Cleaners

Also, pay attention to the great alternative that will allow you to clean large areas from dirt. We advise you to choose models that run on a hosepipe, such as the Mini Jet-Vac.

FAQ